Affiliate Disclosure: This post contains affiliate links. If you use these links to buy something, I may earn a commission at no extra cost to you.
Introduction
If your kitchen or bathroom cabinets are in need of a refresh, sometimes all it takes is a simple hardware upgrade. In today’s blog, I’m going to share five expert tips that will make your DIY cabinet hardware update a total success.
Tip 1: Choosing the Right Hardware Style
Traditional
Modern
Vintage
Cabinet knobs and pulls that I have used in the last couple projects
Wood stain sample pack....this can be extremely helpful to see the color in the space
Tip 2: Measuring for Success
Measuring for new knobs and pulls
Measure the distance between drill holes for pulls.
Measure the size of knobs for single-hole cabinets.
Just get yourself a good tape measure, or a flat ruler.
Measuring for New Hinges
1. Identify the Type of Hinge: Before taking any measurements, identify the type of hinge you’ll need. Common types include concealed, semi-concealed, and exposed hinges. The choice may affect the measurements.
2. Measure the Existing Hinge: If you’re replacing hinges, it’s useful to take measurements of the existing ones. Measure the height, width, and depth. Note the positioning of the screw holes as well.
3. Cup Depth and Diameter: For concealed hinges, you’ll need to measure the cup depth and diameter. Use a caliper for precise measurements.
4. Hinge Offset: Some hinges have an offset, meaning they allow the door to sit a certain distance away from the frame. Measure this offset if applicable.
5. Door Thickness: Finally, measure the thickness of the door where the hinge will be attached. This will help you select the correct hinge size.
All of that explanation to say that really the simplest hinges are the European style mini concealed hinges because they only take a couple of screws to install and to drill a cup in the door
Measuring for New Cabinet Doors
1. Door Dimensions: Use a tape measure to obtain the height and width of the existing doors. If you’re going for a different style, make sure to adjust these dimensions to fit the new design.
2. Frame Clearance: Measure the space around the door frame to ensure there’s enough clearance for the new doors to open and close freely. Factor in any protrusions like moulding or trim.
3. Door Swing: If you’re considering a different type of door swing, take note of any nearby appliances or structures that may hinder movement. This will help you choose an appropriate door style and swing direction.
4. Overlay Measurement: In case you’re going for an overlay door style, measure how much of the face frame will be covered by the closed door. This is crucial for both aesthetics and function.
By meticulously measuring these elements, you set the groundwork for a seamless renovation. Accurate measurements are vital for ensuring that your new hinges and doors not only fit but function optimally.
This step will obviously cost a little bit more and a lot more planning, and a lot more tools. But you can make it as custom as you need it to be. I will list some tools here that could absolutely help get you started on your way.
Tip 3: Tools You'll Need
Before diving into your project, make sure you have the following tools at your disposal:
Tip 4: Installation Techniques
Pre-drilling holes
Temporarily attaching with double-sided tape for positioning
Using the right screws
Tip 5: Maintenance and Longevity
Cleaning your hardware
Tightening screws periodically
Replacing any damaged pieces
Conclusion
Updating your cabinet hardware is an underrated yet impactful way to freshen up your home decor. Ready to take your cabinets to the next level? Click over to [Your Affiliate Company] to get started with all the top-notch tools and supplies you'll need.
Comments